Synapse Audio, the developer behind a lineup of high-quality software synths including acclaimed emulations of legendary hardware, is holding a sale!
In this article, we cover the latest Synapse Audio sale details along with an overview of the products on sale.
This article will be updated whenever the sale changes.
1. Latest Synapse Audio Sale
Black Friday Sale: Until December 6, 2026
- (12/6) Synapse Audio “Obsession” – OB-Xa-modeled synth with a thick, silky sound: PluginFox $69 / Audio Deluxe $69
- (12/6) Synapse Audio “DUNE 3” – Synth with dual multimode filters and over 1,000 patches: PluginFox $159 / Audio Deluxe $159
- (12/6) Synapse Audio “Hydra” – Synth with three routing models that combine three oscillators via phase modulation, ring modulation and more: PluginFox $39 / Audio Deluxe $39
- (12/6) Synapse Audio “Proxima” – Circuit-modeled recreation of a 6-voice analog synth released in 1982: PluginFox $99 / Audio Deluxe $99
- (12/6) Synapse Audio “The Legend HZ” – Analog-modeling synth for film scoring, co-developed with Hans Zimmer: PluginFox $159 / Audio Deluxe $159
- (12/6) Synapse Audio “The Legend” – Analog-modeling synth recreating the Model D, with added unison and polyphonic modes: Audio Deluxe $76
Synapse Audio product lineup:
2. Main Synapse Audio Products on Sale (Software Synths and More)
The Synapse Audio software synths currently on sale include the following products.
Obsession
Obsession is a software synth modeled after the Oberheim OB-Xa. Released in 2020, it generated a great deal of buzz.
Among software recreations of hardware synths, it ranks as one of the most highly rated synthesizers.
Each voice lets you control its envelope, filter, pitch and more individually, producing a silky, thick sound.
Obsession highlights
- Emulation of an analog polyphonic synth with oscillators, filters and amps meticulously modeled from the original hardware
- Fine-tune the sound of each voice board to create organic, lively sounds typical of vintage analog polysynths
- Also features a modulation matrix, step LFO and effects
Key Features
| Feature | Description |
|---|---|
| Synth section | A classic architecture with 2 oscillators, a lowpass filter switchable between 2-pole and 4-pole, 2 ADSR envelopes and 2 LFOs |
| Per-voice control | Each of the 8 or 16 voice boards has trim pots, letting you slightly vary parameters such as cutoff frequency and amp release time per voice. Also includes the oscillator and filter scaling found on the original voice boards |
| 2-part structure | 2-part engine with three switchable modes: Single, Dual and Split |
| Modulation | LFO Steps for tempo-synced rhythmic movement on almost every sound parameter, plus a modulation matrix. LFO shapes can also be drawn freehand |
| Effects | High-quality reverb with shimmer by Mirko Ruta, stereo delay and chorus/ensemble. Also includes an Organic knob that simulates drift caused by temperature changes |
| Other | The full version comes with 500 patches. Supports MPE and NKS, with a resizable interface |
Proxima
Proxima is a software synth modeled after an analog synth released in 1982.
The original hardware is known for its rich 6-voice polyphony, Curtis analog chips, and for being the world’s first synth with MIDI in/out. Everything from the oscillators and filters to the saturating amp has been recreated in fine detail through circuit modeling.
Proxima highlights
- Faithfully recreates the tone and character of the original hardware through circuit modeling
- Adds features not found on the original, such as additional filter types, a modulation matrix, an arpeggiator/sequencer and effects
- Up to 12 voices of polyphony
Key Features
| Feature | Description |
|---|---|
| Oscillators | 2 high-quality VA oscillators. The engine runs at 8x oversampling |
| Filter | Lowpass and bandpass filter types (12/24 dB) |
| Modulation | 10-slot modulation matrix |
| Arpeggiator/Sequencer | A simple, easy-to-understand interface that still allows detailed programming, and it can be used as a modulation matrix source for complex modulation |
| Effects | An effects section that puts the finishing touches on sounds, from electric-guitar-style leads to epic pads |
| Other | Supports MPE, MTS (microtuning) and NKS |
The Legend HZ
The Legend HZ was developed through a collaboration between “The Legend,” a software synth designed after the famous vintage analog Minimoog, and award-winning film composer Hans Zimmer.
It has been designed with meticulous attention to detail to create a highly versatile, user-friendly software synth while faithfully reproducing the sonic character of the original hardware.
Features added from The Legend
- 3 additional oscillators (6 in total) plus polyphony settings
- Modulation matrix
- 32-step sequencer
- MSEG for expanded modulation possibilities
- Expanded effects section
Key Features
| Feature | Description |
|---|---|
| Sound engine | Accurate circuit simulation and 6 high-quality VA oscillators. The engine runs at 8x oversampling |
| Voice modes | Unison, mono, and 4-, 8- and 12-voice polyphonic modes |
| Fixed filter bank | A fixed filter bank modeled after the vintage 914 Fixed Filter Bank, a rare piece of hardware from Hans Zimmer’s personal collection |
| Arpeggiator/Sequencer & Effects | An advanced arpeggiator/sequencer and a comprehensive effects section |
| Presets | Adds 200 factory presets created jointly by sound designer Kevin Schroeder and Hans Zimmer, covering a wide range of cinematic sounds |
| Other | Supports MPE (MIDI Polyphonic Expression) and NKS |
DUNE 3
DUNE 3 builds on the award-winning DUNE 2 synthesizer, adding highly requested features and innovative ideas.
It includes many new patches by experienced sound designers. Because DUNE 3 is fully patch-compatible with DUNE 2, the DUNE 2 presets are also included, doubling the factory library to over 1,000 patches. The scalable user interface supports Full HD as well as Mac Retina displays.
DUNE 3 highlights
- Supports three synthesis types: VA, wavetable and FM
- 8x unison lets you play up to 520 oscillators per note
- Equipped with dual filters, dual arpeggiators and a wavetable editor
Key Features
| Feature | Description |
|---|---|
| Oscillators | Two oscillator stacks of 32 oscillators each, plus a third oscillator and a white/pink noise generator. The “Swarm” mode, an evolution of the supersaw, applies subtle individual modulation to each oscillator for a more lively sound |
| Dual filters | Dual multimode filters with added insert effects. Serial/parallel routing and smooth blending with the Balance knob. Also includes zero-delay-feedback filters based on analog modeling technology, formant/vowel filters, and insert effects such as a phaser |
| Dual arpeggiators | Two individually programmable arpeggiators. In addition to the classic up/down modes, they can play sequences and MIDI files. Also features a random mode and programmable Arp Hold |
| Wavetable editor | Create waveforms by freehand drawing, segments, a dedicated harmonics editor or formula input. Features include morphing, fade in/out, normalize, DC removal and invert/reverse, and waveforms and wavetables can be imported/exported in WAV format |
| Effects | Two master FX buses, each with 9 high-quality effects. New algorithms added to the distortion, chorus, phaser, EQ, delay and reverb categories. Includes an EQ with 4 bands plus variable-slope low/high cuts, and a Shimmer Hall well suited to ambient sounds and pads |
| Modulation | 4 graphical envelopes (MSEG), 3 LFOs and a modulation matrix covering both synth and FX parameters |
| WAV file loading | From version 3.4 onward, oscillator 3 can incorporate WAV files into a sound. You can set a loop range, and when looping is enabled that section repeats while the note is held |
Hydra
Hydra is a multi-model synthesizer with three different routing models, each featuring three oscillators. Each routing model combines the three oscillators in a different way, such as phase modulation or ring modulation.
Its logically organized user interface makes it easy to get an overview of its vast number of parameters and design your own original sounds.
Hydra highlights
- Switch how the oscillators are combined with three routing models
- Covers a wide range, from huge, beautiful stereo pads to vivid leads, bells and powerful sub basses
- Switching the envelopes lets you use it as a synth for drum sounds as well
Key Features
| Feature | Description |
|---|---|
| Oscillators | Two of the three oscillators can choose from 39 preset waveforms and can be saturated individually |
| Filters | Multimode resonant filter and a bass extension filter with stereo spread |
| Trigger modes | Dual-voice and unison trigger modes |
| Percussive mode | Switching the envelopes to percussive mode turns it into a versatile drum sound synthesizer |
| Presets | Comes with 128 presets including house/club-style organs, bells, percussion, basses, delicate ambient atmospheres, powerful leads and rich stereo pads |
That wraps up the latest Synapse Audio sale information.
Synapse Audio product lineup:



